How to care for an Alocasia Zebrina
This plant loves a humid climate, but that doesn’t mean it likes to be watered a lot. It’s better to underwater this plant slightly. Its thick stems contain a lot of moisture, so it won’t need to be watered as often as you would expect. The long stems will store a lot of moisture, which means it’s quite easy to see when your plant is thirsty. When all stems start to droop slightly, their stems are no longer full of moisture and it needs to be watered.
Alocasia Zebrina
Looks are not deceiving when it comes to the beauty of this Elephant Ear! Its speckled stems are true to form as they are the most glorious supports for the large spear-shaped leaves. Alocasia zebrina’s soil should never be allowed to dry out for too long. This eye-catching Alocasia will grow to an impressive height of 3′ if given bright indirect light and fertilizer when actively growing! Each Alocasia is handpicked from the greenhouse, carefully packaged, and shipped directly to you! This plant is toxic if ingested and may cause skin irritation. Keep away from pets and children.
Light
Moderate to bright sunlight is ideal for Alocasia zebrinas. For healthy growth, they require strong indirect light. It’s crucial to keep it in a blinded window or a nook. zebrinas can also live at lower light levels, although they struggle in low light. Because this plant grows towards the sun, turning it when watering it will help it grow properly. Be careful because the plant’s waxy leaves can quickly burn if exposed to direct sunlight.
Water
Once-a-week watering sessions are ideal for zebrinas. These plants prefer wet soil. However, they are prone to root rot if they get overwatered. So it is preferable to soak this plant gently. When watering your zebrina, start at the top and work your way down till the water falls out the bottom. Because the long stems hold a lot of moisture, it’s easy to tell when your plant needs water. When all of the stems begin to wilt gently, their stems are thirsty and need to be hydrated.
To avoid overwatering and root rot in the winter, leave the 2′ of topsoil to dry in between watering. This plant is not resistant to dry weather, and prolonged periods of dehydration will brown the leaf margins. Learn when and how to water your indoor plants!
Temperature
Maintaining an appropriate temperature range for Alocasia Zebrina is one of the most critical aspects of its maintenance. The Alocasia Zebrina is sensitive to cold, and even a minor chill will result in leaf loss. They should be maintained at room temperature, within 60°F to 82°F. At a reduced temperature, their growth may become slow, thus temperature drafts should be avoided.
Humidity
Because zebrinas are from the rainforest, they require a humid climate to flourish properly. These plants will become sensitive to pests if their soil becomes too dry. If your home’s atmosphere is dry or lacks humidity, consider placing a humidifier in the room. Or even placing a pebble-filled plate under the potted plant and filling it with water to offer the plant the moisture it needs. Some people like to put it in their bathroom window, where the zebrina plant will receive sufficient humidity and sunlight. Learn how to increase the humidity in the air around your indoor plants!
Fertilizer
The plant thrives on a slow-release variant of a popular houseplant fertilizer. This should be used monthly from March through September. Every two weeks, a mixed formula should be fed to the plant. Adding liquid fertilizer to its water is also a simple solution. Fertilizer should never be applied to a resting plant in the winter since it might damage the leaves or the entire plant. When fertilizer is applied more than the plant’s requirements, salt builds up in the soil, causing plant death.
Growth Rate
Alocasia plants make quite a statement with its distinctive, arrow-head-shaped leaves and long stalks. They grow best in the spring and early summer. Under optimal conditions, Alocasia zebrinas grow to around 3 feet tall and develop leaves in two weeks.
Pet Friend or Foe
Alocasia zebrina is toxic for both animals and humans! Foe!
Pro Tips
- Infections from pests are another concern for your zebrina. Scales, spider mites, mealybugs, and aphids can readily infest your plant if there is too much moisture on the leaves’ surface. Monitor the bottom part of your leaves regularly for insect infestation or illness. Furthermore, using neem oil or antibacterial soap to decrease the level of damage inflicted by these bugs and viruses is recommended.
- Using a pot with one or more holes drilled at the bottom is best. Excess moisture at the foot of the soil can cause various problems, including root rot; therefore, drainage is essential for Alocasia zebrina plants.
- The best time for propagation is in the spring and summer months. The rhizome should never be divided during the winter when the plant is resting.
- Find out the do’s and don’ts for your new indoor plants!
How to care for an Alocasia Zebrina
If you’re like me, you probably can’t resist buying a new houseplant every time you go to the garden center. I’m always looking for interesting plants that I haven’t seen before, and when I came across an Alocasia Zebrina at my local nursery, I knew I had to have it. This exotic-looking plant has dark green leaves with zebra-like patterns on its stems running down the center, and it’s sure to add some personality to any room in your home. But before you run out and buy one of these beauties, there are a few things you need to know about how to care for an Alocasia Zebrina. Keep reading for tips on watering, fertilizing, and potting your new houseplant!
In this plant care guide, we’ll go over these topics:
Table of contents
- Humidity and watering
- When should I water my Alocasia Zebrina?
- How do I water an Alocasia Zebrina?
- Rotating the plant
- Dropping leaves
- Sweating leaves
- Alocasia Stingray
- Alocasia Cucullata
Let’s get started and learn how to take care of the Alocasia Zebrina!
Humidity and watering
The Alocasia Zebrina is a tropical plant, which means it needs a humid environment. If it gets too dry, it’ll become vulnerable to pests.
Luckily, there is a very simple way to keep this plant humid enough: mist it occasionally. It’s best to do this at least once per week in the morning. By misting your Alocasia Zebrina, you also prevent the leaves from becoming dusty. It makes your plant look healthier and it’ll be happier with the added humidity.
When should I water my Alocasia Zebrina?
This plant loves a humid climate, but that doesn’t mean it likes to be watered a lot. It’s better to underwater this plant slightly. Its thick stems contain a lot of moisture, so it won’t need to be watered as often as you would expect. The long stems will store a lot of moisture, which means it’s quite easy to see when your plant is thirsty. When all stems start to droop slightly, their stems are no longer full of moisture and it needs to be watered.
If only a single stem starts to droop, don’t water your plant. A single drooping stem could mean that your plant is trying to replace it with a new leaf.
How do I water an Alocasia Zebrina?
A simple trick you can use when watering this plant is to water it until water starts to drip out of the drainage hole. When the water drips out of the drainage hole, the soil has absorbed all the moisture it can. Draining the excess water is important to prevent root rot. The Alocasia Zebrina doesn’t like to sit in wet soil and this will cause root rot quite quickly.
Nursery pot inside of a pot without drainage holes
If you don’t have a pot with a drainage hole, you can use the plastic pot it came in and place it inside of the “permanent” pot. You can see this in the image above. Now, when you want to water your Alocasia Zebrina, you can lift out the nursery pot and put it in a sink.
Now you can water your plant, drain the excess water, and put it back into its pot without drainage holes. If this is also not an option for you, simply water it more often, but only in very small quantities. The goal is to keep the soil slightly damp, but not so much that your Alocasia sits in wet soil.
For a lot of plants, you can simply touch the soil and if it feels dry, you can water it. This is not the case for this plant. This Alocasia is very sensitive to water. The best way to determine if it needs a drink (besides the drooping stems), is to lift the pot and if it feels light, water it. This could take some practice. So when you see your plant drooping, don’t water it immediately, but lift it first. Now you will be able to tell what its “dry” weight is for the next time.
How much sunlight does an Alocasia Zebrina need?
The Alocasia Zebrina needs a lot of sunlight. I have it in a room with a south-facing window, so it gets a lot of sun during the day. Don’t put it right next to the window though, this will burn its beautiful, big leaves. If your plant gets slightly yellow leaves, you know the sun was too much for the plant and you’ll need to move it to a slightly more shady spot. If you don’t have a room with a south-facing window, that’s no problem! You can also place it next to the west or east-facing window.
These rooms won’t get as much sun, but by placing the plant right next to the window, it’ll still be enough throughout the day.
Rotating the plant
This plant craves sunlight, even to such an extent that if you don’t give it enough of this, it’ll start to become leggy (stretch its stems) and grow towards the light.
If you don’t pay enough attention to this, the plant will grow to one side, instead of up. A simple solution to prevent this “reaching for the light” is to rotate this plant 90 degrees after every time you water it. If your plant is not reaching for the sun, you don’t have to do anything, your plant is content with its place.
What is the best type of soil for an Alocasia Zebrina?
The soil choice is very important when keeping plants. You need to look at the specific needs of each plant. As mentioned earlier in this guide, this plant should be underwatered rather than overwatered, because overwatering could kill it. A way to make sure that the chances of overwatering are reduced is by using very well-draining soil. This will make sure all excess water is drained out of the pot and only the minimum required water stays behind. As this plant is very sensitive to overwatering, this is perfect. It will only be able to absorb a minimal amount of water and its roots won’t be at risk of rotting as easily.
How often should I fertilize an Alocasia Zebrina?
The Alocasia Zebrina grows really quickly in its growing period from spring until the early autumn. During this time, you should fertilize the plant every two weeks to give it the energy it needs to keep growing so quickly. Always make sure you flush the remnants of the fertilizer out every few months. You can do this by watering the plant thoroughly and letting the water drain through the bottom of the pot. This will keep the soil a habitable place for your plant.
What is the best pot size for an Alocasia Zebrina?
The Alocasia Zebrina loves to be rootbound in a small pot. So don’t repot this plant in a larger pot too quickly. It’s very happy to be in a small pot. When you eventually do have to move this plant to a bigger pot, make sure to do this in small increments. You want the Alocasia to settle in a slightly bigger pot quickly to keep it happy. When you see the roots start to come out of the bottom of the pot, you know your Zebrina is a happy plant.
Is the Alocasia Zebrina toxic to pets?
The Alocasia Zebrina is poisonous when ingested and the sap from its stem can irritate your skin. So it’s best to keep this plant out of reach from small children and pets. This way you can enjoy this plant to the fullest and it will look the most beautiful in the long run.
How large does an Alocasia Zebrina get?
Alocasia Zebrinas can range quite a bit in size, from small plants grown from bulbs to large mature plants that are as tall as 3 feet. Other plants in the Alocasia family can get much bigger, but the Alocasia Zebrina stays small enough to be the perfect houseplant.
Alocasia Zebrina Character traits
Every plant has its character traits, like growing flowers. The Alocasia Zebrina also has a few character traits that look worse than they are. This section is to help you understand why your plant does what it does and why you shouldn’t blame yourself for things your plant naturally does.
Dropping leaves
When an Alocasia Zebrina is growing, it will put out quite a few leaves in a short period. Until a certain point, this does not affect the plant at all. Once your plant has about 5 leaves, it’ll start to drop the weakest leaves spectacularly. The image below is what this looks like.
The plant cuts off the nutrients to the weakest leaves to preserve them for new growth. The plant can only sustain 4-5 leaves at once and when new leaves are being grown, the old and weak ones will die. There is nothing wrong with this, this is how the plant naturally behaves. There is no way to save the leaf and you should see it as a good sign that there are new leaves on the way.
Sweating leaves
When you take care of your Alocasia Zebrina, you might have seen water drops on the leaves before. These appear when your plant is a little overwatered and it’s trying to “sweat” the excess water off by letting it escape from tiny pores in the leaves. This is no reason for concern, the plant is fine. However, it’s good to keep in mind for watering your plants next time.
Other Alocasias with similar care
Several other Alocasias require similar care to the Alocasia Zebrina. So if you have one of the following Alocasia plants, you can use this guide to take care of your Alocasia as well.
Alocasia Stingray
The Alocasia Stringray looks a little bit like the Alocasia Zebrina. The stems store moisture just like the Alocasia Zebrina and have very similar sunlight requirements to the Alocasia Zebrina.
Alocasia Cucullata
The Alocasia Cucullata looks different than the other Alocasias, but it still has the big stems that store all that moisture. That’s why it can go quite a while without being watered.