Marine Plywood

Marine-grade plywood is a specially-designed panel made of Douglas-fir or Western Larch, according to APA: The Engineered Wood Association. All plies may have knots, but no knotholes.

What Is Marine-Grade Plywood?

Lisa Hallett Taylor is an expert in architecture and landscape design who has written more than 1,000 articles about pool, patio, garden, and home improvement over 12 years. She has a bachelor’s degree in Environmental Design and is certified in fine and decorative arts appraisal.

Johnathan C. Brewer II is a licensed general contractor specializing in kitchen, bath remodels, and general construction with two decades of professional experience.

Sarah Scott is a fact-checker and researcher who has worked in the custom home building industry in sales, marketing, and design.

Marine-grade plywood, often simply called marine plywood, is not what it’s often claimed to be. That is, it’s not waterproof. It is a good-quality, hardwood plywood made with waterproof glue, but since it’s not treated with chemicals, it is not rot-resistant. Better grades also tend to be lightweight, strong, and virtually free of defects. These qualities are what make this plywood a popular choice for building boats and boat parts. It’s also a smart option for durable outdoor furniture projects in coastal areas, especially after it receives a strong protective finish.

What Is Marine-Grade Plywood?

Marine-grade plywood is a specially-designed panel made of Douglas-fir or Western Larch, according to APA: The Engineered Wood Association. All plies may have knots, but no knotholes.

Marine plywood is available in the following grades:

• A-A
• A-B
• B-B
• Medium-density overlay (MDO)
• High-density overlay (HDO)

Other Strong Woods

Wood species that have a natural resistance to decay, like redwood, cedar, ipe, shorea, and cypress are less likely to rot due to molds and other organisms that feed on the wood. Marine plywood is not pressure-treated to resist decay, like pressure-treated lumber and plywood. This means if marine plywood will be exposed to moisture, it must be protected by a good water-resistant finish. If you need a material that can stand up to moisture without a protective finish, choose pressure-treated lumber or plywood rated for the expected level of exposure.

What Makes It Strong?

Thin sheets of wood veneer—known as plies (plural of ply)—are used to make plywood. Arranging the sheets in perpendicular layers is what strengthens the plywood. Each piece of plywood has an odd number of layers. Cross-lamination—arranging the plies perpendicular to one another—is what gives a panel strength in both directions. To finish it, the plywood panel is bonded under heat and pressure.

Why Waterproof Glue?

The main benefit of using waterproof glue in marine plywood is that if the plywood is exposed to moisture, or even very high humidity or boiling temperatures, the glue won’t fail, and therefore the wood layers of the plywood won’t delaminate, or fall apart. This is an important design characteristic if you’re building a boat hull with plywood. If the hull’s protective finish is damaged and the wood gets wet, the plywood will remain structurally intact.

Plywood Becomes Popular

A waterproof adhesive was invented in 1934, paving the way for plywood and its potential. Boats and barracks during World War II were made out of plywood. In the postwar building boom, plywood was used to build houses and cities across the United States. By 1954, the industry grew to more than 100 mills and production approached 4 billion square feet, according to APA.

Good Plywood Is Different

Even though the plywood products sold by most hardware stores are graded A, B. C. and D (with A being the best), they aren’t considered as high quality as marine and other types of quality hardwood plywood. Standard plywood is made with fewer, thicker layers and mostly contains softwood, like pine or Douglas fir. The interior layers also have voids, or holes, that you can’t see until you cut into the plywood panel. Marine plywood is a type of hardwood plywood. True hardwood plywood is made with thin layers of 100 percent hardwood, which generally is stronger and harder and has a finer grain than softwood.

Plywood sold as “void-free” does not have voids hidden in the wood layers. As for the layers, a lot of thin layers is better than fewer thicker layers because thinner results in a stronger, denser panel with edges that cut and sand cleaner.

Patio Furniture and Outdoor Structures

Experienced do-it-yourselfers and woodworkers use marine plywood for various outdoor projects, including:

• Garden furniture, like tables, chairs, and benches
• Decking
• Porches
• Arbors
• Pergolas
• Planters

Tip

While marine plywood is great for making furniture, remember that it must be finished with a powerful sealant to protect it from moisture damage.

The Spruce uses only high-quality sources, including peer-reviewed studies, to support the facts within our articles. Read our editorial process to learn more about how we fact-check and keep our content accurate, reliable, and trustworthy.

1. Technical Topics: Marine Grade Plywood. APA – The Engineered Wood Association.
2. History of APA, Plywood and Engineered Wood. APA – The Engineered Wood Association.

Marine Plywood

Marine-grade plywood is a good-quality, hardwood plywood made with waterproof glue. It tends to be lightweight, strong, and virtually free of defects. These qualities are what make this plywood a popular choice for building boats and boat parts. It’s also a smart option for durable outdoor furniture projects in coastal areas, especially after it receives a strong protective finish.

Showing all 3 results

Aquatek Meranti Plywood

Bruynzeel Okoume Plywood

Douglas Fir Marine Plywood

It’s great having someone so knowledgeable just one phone call, Email, or IM away! Between the new website and your own personal responsiveness, you make it very easy to do business. I wouldn’t be this
far along in my project without your assistance.

Your 301 resin is the bread and butter of my operation. I also use your 345 to keep everything together. Your pigments are a great shortcut to get the right colors on my dinosaurs. I’ve been a customer for years.

For more information on Wells Dinosaur Haven, a free dinosaur park in Uncasville, CT please visit roadsideamerica.com/story/16574

I have been coming here for years. The staff is always helpful and always gets me what I need. Their advice on how to work on different jobs is always welcome.

If you need a fiberglass contractor, please call Chris at 860-373-3938. His local area is Groton, CT, but is willing to travel for a job.

Prompt response and simple answers to simple questions.