Standard Window Measurements Guide

Next up, let’s look at sliding window standard sizes.

What Are Standard Window Sizes?

What is the standard window size? Standard window sizes depend on the type of window you choose for your home. Keep in mind that manufacturers always take off a ½ inch on both the window height and width ranges to ensure successful installation and function. The ½ inch allows for the contractors to install the window easily and to secure it with shims.

Here are the standard sizes for the most common types of windows:

Double-hung windows

How wide is a standard window? Double-hung windows are one of the most common window types where both sashes can move up and down. They start at 24 inches and can go up to 48 inches horizontal. Their heights can vary from 36 to 72, including heights of 44, 52, 54, and 62 inches. Don’t forget to take 1/2 inch off of each measurement to get the correct window size.

Sliding windows

Sliding windows have fewer options than double-hung windows: 36, 48, 60, 72, and 84 inches are the horizontal sizes. 24, 36, 48, and 60 inches are the vertical sizes. If you hear an installer say a window is “6040,” that means that a window is six feet wide and four feet tall.

Picture windows

Picture windows can’t open, so they can be much taller and wider. Widths can be 2 feet, 3 feet, 4 feet, 5 feet, 6 feet, and 8 feet. Standard heights can range from 2 feet tall to 8 feet tall, with additional heights of 18, 52, 54, and 62 inches. Rough openings are in whole numbers, while 1/2 inch is taken from each rough opening size to get the actual window size. You should also check the single-hung window size chart.

Bay windows

Just like a picture window, a bay window really opens up your home. Bay windows provide more unique architectural characteristics than a standard, double-hung window, allowing access to much more light. They’re more attractive due to their design and ornate features, and because they are pretty large. A bay window’s standard size width is from 3-feet, six-inches to 10-feet, six-inches. The standard height goes from 3-feet to 6-feet, six-inches.

Casement windows

Casement windows are designed to open from the side and are perfect for areas of the house that require more ventilation, like a bathroom or a kitchen. Standard width is between 1 foot, 2 inches and 2 feet, 11.5 inches. Standard height is between 2 feet, 5.5 inches, and 6 feet, 5.5 inches.

Awning windows

Similarly to the casement window, the awning window offers plenty of ventilation. It opens outward and is hinged at the top. If you open an awning window in light rain, the moisture won’t bother you since these windows are literally weatherproof. The standard width is between 2 inches and 3 feet, 10 inches, and the standard height is between 1 foot, 8 inches and 7 feet, 8 inches.

Custom window sizes

Remember that you can also always have custom-size windows made that are produced based on your exact measurements.

Are you thinking about a home improvement project? Feel free to contact 1-800-HANSONS for a free estimate.

Get a Free Estimate Today

60% off installation or no interest and no payments if paid in full within 24 months!*

*Interest is billed during promo period but will be waived if the amount financed is paid in full before promo period expires. Click here for offer details.

Standard Window Measurements Guide

Are you planning to buy new windows or replace your old windows? The first step is usually to get it right with your window sizes.

Standard sizes are available for windows used in new construction because these windows are installed and attached to the framed openings before any additional layers of building material are added.

In order for the replacement window to fit appropriately, to get the best installation possible, the window is ordered at a custom size.

While there may not be “standard” window sizes for replacement windows there are common size approximations for window openings in Texas: 2×3; 2×4; 3×5; 3×6; 3×7; 3×8; 4×6; 4×7; 4×8.

But what are some of these standard window sizes? Let’s get started.

When measuring windows for replacement, you won’t have access to the precise rough opening. So, to get the most accurate measurements, you’ll take measurements at multiple points of the existing window to get an approximate size of the rough opening. This works for replacement and is the reason why replacement windows are ordered with custom sizes.

Different window types have varied standard window measurements. We’ll go over the five major window types and their standard window dimensions.

First off, let’s start with double-hung windows.

Standard double-hung window sizes

A double-hung has two movable window parts known as sashes. One at the top, the other at the bottom. In most cases, the top sash remains closed while the lower is raised to allow for some ventilation. Double-hung windows are longer vertically than horizontally.

Important to note: “Window measurements are always annotated in feet-inch format abbreviated as ft. /in. Therefore, read the measurements starting with the width followed by height sizes.”

Let’s look at this example of a 2×3 feet window. The normal window size will be:

2 feet, 0 inches by 3 feet, 0 inches correctly annotated as 2030. (Most windows will have a width between 24-48 ft. and heights between 36-72 ft.)

Now that you know the way the measurements are presented, it’s important to understand that replacement window sizings will be a little different. Each replacement window will have a custom size to ensure they will fit in the rough opening already available.

Here are normal windows sizes for double-hung windows you may find in North Texas:

• 2×3 ft. (2030)
• 2×4 ft., 4 in (2044)
• 2 ft., 8 in by 4 ft. (2840)
• 2×8 in by 5×2 in (2852)
• 4×6 ft. (4060)

You can also use these measurements for single-hung windows. The only difference with the double-hung windows is that the top sash does not move. However, the lower sash is mobile.

Next up, let’s look at sliding window standard sizes.

Standard sliding window sizes

Sliding windows have two sashes that open and close horizontally. In some cases, either one or both sashes can move. Sliding windows are similar to hung windows because each of these styles technically slides but one slides vertically and the other horizontally.

Sliding windows tend to be longer in width than in height. A sliding window size is usually between 36-84 inches in width and between 24-60 inches in height.

Now that you have a general idea of what the standard window sizes are, we can get more specific. As you look for windows, it’s important to understand the difference between the rough opening and the actual size of a window.

A rough opening is the space on a wall that is cut out and designated for a window. The actual size is usually half an inch smaller than the rough opening size. Conversely, the actual size is usually half an inch smaller than the rough opening size.

Windows used for replacement aren’t available in “standard” sizes, they are always custom. Common sliding window measurements you’ll see while window shopping are:

• 3×2 ft. (3020)
• 3×3 ft. (3030)
• 5×3 ft. (5030)
• 6×4 ft. 6040)
• 7×4 ft. (7040)

Apart from the various windows with moving sashes, we also have non-operable windows which are often referred to as fixed or picture windows. More about them is in this next part.

Picture windows are the type of window meant to really showcase a view, they’re often used to frame gallery-like openings and as additions to complement operable windows.

Picture windows are generally thought of as simple in design and simple to manufacture, they can in fact be a great way to save costs on a project but the larger they are the more difficult they are to manufacture.

Making large sheets of glass without imperfections is challenging and building frames strong enough to support the weight of the glass (especially insulated and tempered glass) is also a challenge.

The normal window size for picture windows is between 24-96 inches for widths and 12-96 inches for heights.

Windows used for replacement aren’t available in “standard” sizes, they are always custom. Here are some common window sizes for picture windows you’ll likely see on the market:

• 3×2 ft. (3020)
• 4×5 ft. (4050)
• 5×3 ft. (5030)
• 6×4 ft. (6040)

Casement windows open more like traditional hinged doors except they are fixed to the frame and they open in a controlled manner.

Casement windows may have one or more sashes depending on the design. Their main purpose is to keep your house ventilated.

Casement windows are common in bathrooms and kitchens. They are increasingly popular in more common areas of the home, especially living rooms.

Common casement window dimensions range between 17-41 inches in height and 16-33 inches in width. Replacement windows are almost always custom sizes. However, there are some common window sizes.

Some dimension combinations for casement standard-size windows include:

• 1 ft., 7 in by 1 ft., 4 in (1714)
• 1 ft., 7 in by 2 ft., 5 in (1725)
• 2 ft., 9 in by 2 ft., 9 in (2929)
• 3 ft., 5 in by 2 ft., 5 in ( 3525)

Bay windows add beauty and architectural enhancements to your house and can make your rooms feel more spacious.

Common bay window sizes are as follows:

• Widths between 3 ft., 6 in, and 10 ft., 6 in
• Heights between 3-6 feet, 6 in

Expected bay window size combinations include:

• 3 ft., 6 in by 3 feet (3630)
• 3 ft., 6 in by 6 feet, 6 inches (3666)

1. Are window sizes standardized?

No, window sizes are not standardized. However, you may find some common window size ranges on the market depending on your window manufacturer and the window spaces designated for your home. These are typically just the most common sizes found in homes.

2. What window sizes are standard

Standard window sizes will depend on the type of window you choose for your home. However, most windows will have sizes between 24 and 48 inches.

3. Where is the information on the window size found?

Check for markings on the surfaces of your window. You can typically find the information about your window size and warranty in between the panels. It should look like this:

4. Can you change the size of a window opening?

Yes, you can change the size of your current window opening to allow for a bigger or smaller window to be installed instead.

Final thoughts

Generally, windows for new construction applications can be larger in size because they are being installed before any additional building materials go on the home.

In order to keep replacement window installations affordable, we do everything we can to keep the additional building materials unbothered. Because of this, the replacement window frame is often smaller than the original window but it also means the window should go into the opening easily.

You have to be careful with ordering the right size window so that you avoid having too much space between the window frame and the opening. The window should sit just right.

If you have a lot of space it means you’ll need more material to get it to sit right including shims and insulation, it also results in more air getting in through the space in the wall.