10 Types of Saws and How to Choose the Right One for Your Project

Best For: Framing and finish carpentry when you need to make simple or complex angle cuts.

7 Types of Saws Every DIYer Should Get to Know

Familiarize yourself with these saws and their uses, and your next DIY project is sure to be a cut above the rest.

By Glenda Taylor and Bob Vila | Updated May 18, 2022 11:11 AM

We may earn revenue from the products available on this page and participate in affiliate programs.

Whether you want to build a rustic bench, install trim molding, or plumb a new sink, odds are that you’ll need to cut some material to size—and there’s a saw out there waiting to help you do just that. The following seven types of saws cover a spectrum of DIY scenarios, from wood to metal. Familiarize yourself with which specialties each possess, and you can tackle whatever project you have in mind.

It’s All About the Teeth

As you go about adding saws to your toolbox and workshop, you’ll find that many saw blades are rated by teeth per inch (TPI). These numbers range from 2 to 32. Blades with lower TPI numbers will cut quickly but produce rougher cuts. The higher TPI ratings will produce fine, smooth cuts in wood and similar materials.

TYPE OF SAW: Traditional Handsaw

No woodworker’s shop is complete without a traditional handsaw, with its large blade and sturdy handle. Though the handsaw is 100 percent muscle-powered, it steps in when a power saw just won’t do, such as when you need to cut through a post that is too thick for a circular saw blade. Choose the type of traditional handsaw you need based on the cut you intend to make and the TPI needed to make it.

• If you need to rip wood (or cut wood lengthwise with its grain), choose a rip saw with large, angled teeth and an average of 5 TPI.
• Cutting across the grain of the wood takes a crosscut handsaw, which has between 10 and 12 TPI and shorter teeth than a rip saw.
• Looking for a do-it-all compromise? The dual-cut (or “hybrid”) handsaw features an average of 6 to 8 TPI and can both rip wood and cut across the grain.

Best For: Cutting wood by hand.

Our Recommendation: For an all-around, affordable crosscut handsaw, you won’t go wrong with Stanley’s 26-Inch Short Cut Saw ($19.99 on Amazon). With 12 TPI, it produces quick and smooth cross-grain cuts. When you’re ready to invest in a saw with ripping power that will last for years, though, consider Crown’s 190, 24-inch Rip Saw and its 4.1 TPI ($82.85 on Amazon).

TYPE OF SAW: Hacksaw

With thin, interchangeable blades ranging from 14 to 32 TPI, the C-shaped hacksaw is most often used for cutting metal pipes. Its range of TPI options, though, makes it useful for cutting sheet metal, PVC, and conduit as well—simply swap out the 10- to 12-inch blades, which are held in place by screw nuts on each end. A hacksaw also comes with a tension nut that allows you to stretch the blade taut for easier sawing. Depending on the thickness of material (metal or otherwise) that you’re cutting, you may also change out the hacksaw’s tooth pattern:

• Small teeth on the raker set hacksaw blade are arranged in sets of three for easy cutting of standard metal pipes.
• A regular set hacksaw blade features teeth positioned next to one another without spaces, but every other tooth angles a different direction, either forward or backward. It’s intended for cutting soft metal and other materials, such as PVC.
• On a wavy set blade, the teeth are positioned next to one another, but the tooth pattern features a slight wave from one side to the other. Choose this type of blade when cutting thin metal, such as ducting.

Best For: Cutting metal.

Our Recommendation: For good cutting control, we like the rubber grips on both the handle and the front frame of TEKTON’s 2-in-1 High Tension Hacksaw, which allows the user to hold the saw with both hands ($12.99 at Amazon). The TEKTON saw comes with one 12-inch, 18 TPI blade and can store six more blades in its handle.

TYPE OF SAW: Coping Saw

The U-shaped coping saw has only one purpose: coping or “back-beveled” cuts for trim installation around inside corners. While it resembles and functions like a hacksaw, the coping saw’s frame is lighter in weight and the blade is shorter—typically 6-¾”-long and anywhere from 10 to 32 TPI. The tiny blades make it possible to back-cut curves and create precise joints when installing crown molding and other types of trim.

Best For: Creating professional-looking inside corner joints when installing trim.

Our Recommendation: For sharp, accurate coping cuts, we like the Husky 6½-Inch Deep-Cut Coping Saw ($7.88 at The Home Depot). It features a deep frame throat, giving you plenty of room to back-cut even wide pieces of trim, and its 32 TPI blade can be rotated a full 360-degrees to saw at virtually any angle.

TYPE OF SAW: Jigsaw

A versatile saw for DIYers, the jigsaw can cut straight lines like a circular saw (see below) but its real claim to fame is the ability to cut curves. Considered one of the safer power saws, the jigsaw features a large flat base called a “shoe,” which rests flat on the surface of the material you’re cutting and surrounds the blade and offers some protection. Many jigsaws come with an adjustable shoe that tilts, allowing you to cut on an angle when needed.

These types of saws can cut nearly any type of wood using blades with a TPI between 8 and 10. The teeth on a standard jigsaw blade point upward, so the saw cuts on the blade’s upstroke. Reverse blades, which cut on the downstroke, are available for cutting materials with a finished surface, such as a laminate countertop. While blades come in a variety of lengths, width depends on the curve: Choose one that is ¼-inch-wide to cut tight curves and ⅜-inch-wide blades to cut standard curves.

Best For: Cutting curves in wood.

Our Recommendation: If you’re looking for a dependable jigsaw for DIY projects, large or small, consider DEWALT’s corded 5.5 Amp Top Handle Jigsaw kit ($99 on Amazon). It has a variable speed dial for adjusting cutting speed, and it comes with its own carrying bag.

TYPE OF SAW: Circular Saw

Designed to cut straight lines in dimensional lumber, plywood, rigid foam board, and even concrete, the circular saw is one of the most popular saws for framing and can substitute on the jobsite for a table saw. It features an encased circular blade and a wide base that fits flat against the material you’re cutting and, on most models, adjusted so you can vary the depth of the cut.

Circular saw blades are labeled for the type of material they’re designed to cut: Wood blades cut plywood or lumber, masonry blades cut joints in a concrete sidewalk, and so on. Circular saws come in a variety of sizes, determined by the diameter of the blade they use. While the most common blade diameter for circular saws is 7¼ inches (suitable for most construction tasks), you can find saws with blades as small as 4 inches for light woodworking projects or a large as 12 inches for cutting heavy timbers.

Best For: Cutting framing materials, including wall studs, joists, rafters, and sheathing.

Our Recommendation: If you enjoy building garden sheds, playhouses, and other structures, the RYOBI 7¼-inch 13-Amp Circular Saw is an affordable, yet dependable, circular saw ($39.97 at The Home Depot). It comes with a spindle lock for easy blade changes, and its 13 Amp motor is suitable for cutting through plywood and standard dimensional lumber.

TYPE OF SAW: Miter Saw

The main purpose of a miter saw is to make precision crosscuts when framing, installing molding, or even cutting siding strips. Today’s miter saws make angled cuts based on the same principle as their manual “miter box” siblings, although they can perform even more complex cuts. A miter saw’s heavy steel base can be mounted on a workshop table for stability, and a steel guide along its back edge, called a “fence,” aligns the material to be cut. The actual saw blade is housed in a large disk on an adjustable arm that can be raised and lowered as well as swiveled from side to side to cut on virtually any angle.

While all miter saws make angled cuts, a compound miter saw has the ability to tilt on its axis to make slanted cuts in addition to angled cuts. On a sliding miter saw, the arm can be pulled forward when the saw is operating, making it possible to cut wider boards or strips of siding. Some high-end miter saws feature laser guides for extra-precise cuts. Miter saws are available in 10-inch and 12-inch sizes and range in price from around $100 to over $600, depending on quality. The larger 12-inch size is usually reserved for commercial use.

Best For: Framing and finish carpentry when you need to make simple or complex angle cuts.

Our Recommendation: The Hitachi 15-Amp, 10-inch Compound Miter Saw features a 24 TPI blade for angled cuts and simple bevel cuts—making it a solid choice for most DIY building and trimming projects ($109 on Amazon).

TYPE OF SAW: Chainsaw

The chainsaw is designed to cut tree limbs or fell entire trees with its dozens of sharp teeth that rotate around the guide bar. Guide bars range from 14 inches long (for light cutting and pruning) up to 36 inches long (for use by lumberjacks) and can be interchangeable on some models of chainsaws. For most DIYers, a chainsaw with an 18- to 20-inch guide bar is sufficient. Keep in mind that a 16-inch chainsaw bar will fell a tree that’s 32-inch in diameter by sawing systematically around the entire trunk of the tree. While some smaller, corded chainsaws work for trimming and pruning nearby the house, most are fuel-operated and can be taken into remote areas for harvesting firewood. Prices start under $100 for lightweight electric models and run into the thousands for commercial-grade chainsaws.

Safety Note: Chainsaws are among the most powerful saws around, but they’re also quite dangerous because the tip of the guide bar can kick back during operation. Before operating any chainsaw, read the owner’s manual carefully and familiarize yourself with the saw’s safety features and safe operating techniques.

Best For: Cutting firewood and trimming trees.

Our Recommendation: The Husqvarna 44E 16-inch 2-Stroke, X-Torq Gas-powered Chain Saw makes quick work of pruning branches and harvesting firewood ($299.95 on Amazon). It comes with a 16-inch guide bar, and it can be fitted with a longer 18-inch bar if desired. Though not the cheapest model on the market, this 10 lb. chainsaw is powerful and relatively lightweight, so you can cut without suffering too much arm and back strain.

10 Types of Saws and How to Choose the Right One for Your Project

Get to know the different types of saws, both manual and powered.

Most DIYers know what a saw is, but learning the different types of saws and what saws can be used for can help level up your projects. Some saws are for quick, rough cuts while others are for precision. Some saws can handle cutting details and curves while others are designed to cut wood straight as an arrow. Some types of saws are better for cutting plastic and metal while others are designated for cutting wood. Even still, some saws can be fitted with different blades to cut a variety of materials.

So how do you determine which saw is best for your project? Below, our saw guide will teach you everything you need to know about the most common saws.

Circular Saw

Best For: Wood, crosscuts, rip cuts

Cost: $30 to $160

A circular saw, sometimes called a skilsaw due to its association with the Skilsaw brand, is a type of saw that every DIYer should have in their toolbox. Perfect for quickly and accurately cutting lumber, circular saws feature a handle with a trigger at the rear and a secondary handle on the top for steadying the saw. The circular blade protrudes from the bottom and its depth is controlled by an adjustable shoe.

Miter Saw

Best For: Wood, PVC, angled crosscuts, straight crosscuts

Cost: $100 to $1,600

Miter saws are necessary if you wish to cut materials at precision angles. The miter saw features its own table and fence to hold the material. Once the material is placed on the table and against the fence, the blade is adjusted to the desired angle and pushed down into the material.

Table Saw

Best For: Wood, paneling, rip cuts, angled cuts

Cost: $150 to $10,000+

Table saws are named for their large table-like cutting surface. Somewhere near the middle of a table saw is a circular blade that can be moved up and down and tilted to cut angles. Think of it as an upside-down circular saw that’s permanently mounted to a table. The material is then pushed across the table, allowing the blade to slice through it. An adjustable fence on top of the table controls the width of the cut.

Jigsaw

Best For: Wood, plastic, metal, plunge cuts, curved cuts

Cost: $30 to $450

Jigsaws are handy for several cutting needs, but they’re absolutely necessary if you desire to cut curves, especially in the middle of a material. The jigsaw is designed for one-handed operation, with a handle on top with a trigger. A quick-change straight blade protrudes from the bottom at the front of the saw. Because the blade is only attached to the saw on one side, cuts can start at the center of a material rather than only at the edge.

Band Saw

Best For: Wood, metal, rip cuts, large material

Cost: $150 to $2,000

A band saw is a large, floor-mounted saw that uses a band blade. When powered on, the band moves in a constant rotation, much like the serpentine belt on a car. The blade runs through a table with a fence, which allows the user to push materials across, making accurate, straight cuts. The benefit of a band saw over a table saw is its ability to make rip cuts through much thicker material.

Scroll Saw

Best For: Wood, metal, plastic, detail cuts, curves

Cost: $100 to $1,100

A scroll saw is kind of like a mini band saw that functions more like a table-mounted jigsaw. Scroll saws have a very thin, short blade that quickly moves up and down through the middle of a small table. This allows the user to move and manipulate materials on the table, effortlessly cutting out detailed curves.

Tooth Saw or Hand Saw

Best For: Wood, crosscuts

Cost: $10 to $30

A tooth saw, often called a hand saw or crosscut saw, is what many people picture when they think of a manual saw. It has a handle at the back, traditionally made of wood, with a long protruding blade with teeth at the bottom. With a little practice, a hand saw can make quick cuts through lumber.

Reciprocating Saw

Best For: Wood, metal, plastic, demolition

Cost: $30 to $300

Reciprocating saws, known by the popular branding Sawzall, are essentially reserved for demolition. This is because, though they are very efficient and powerful, they are difficult to control in a precise manner. Reciprocating saws consist of a handle at the back, a long motor housing with a secondary grip, and a straight blade that protrudes out the front.

Hacksaw

Best For: Metal, plastic, pipes, clean crosscuts

Cost: $5 to $50

Hacksaws are the go-to manual saw for cutting metal and plastic, often in the form of pipes, rods, dowels, and brackets. Many hacksaws feature a C-shaped frame with a handle on one side and a replaceable blade mounted across the bottom. Hacksaw blades have very fine teeth, which makes for clean cuts on metal and plastic.

Chainsaw

Best For: Wood, live wood, large lumber, fence posts

Cost: $100 to $2,000+

Most everyone knows that a chainsaw is geared toward cutting trees. The powerful, often gas-powered motor drives a chain fitted with several teeth around a straight bar at a high speed. The sharp-toothed chain removes small bites of wood rapidly, efficiently sawing through logs, lumber, and wooden fenceposts.

Which Type of Saw to Buy First

There truly is no one-size-fits-all saw. If you’re on a budget, choose the one that can do the most and start assembling your toolbox collection from there. For most, a circular saw is a great place to start, but avid DIYers will quickly find a use for a miter saw, a table saw, and eventually, every saw on this list.